CLACK CL1-EE

FEATURES AND BENEFITS

MADE IN THE USA

• Solid state microprocessor with easy access front panel settings
• Three modes of operation; meter immediate, meter delayed, or time clock delayed
• Double backwash feature offers optimum regeneration, cleaning ability, and efficiency
• Capable of 36 pre-programmed regeneration cycles based on control valve setting
• Days override feature; 1 – 28 days available
• Backwash and brining ability to 21” diameter tanks
• Downflow/upflow regeneration
• Stores system configuration and operation data in nonvolatile memory
• Coin Cell Lithium battery back-up with an 8 hour carry over
• Level VI 15-volt output DC power supply provides safe and easy installation
• Control valve design provides optimum service and backwash rates
• Pre or Post treated water regenerant refill
• Reliable and proven DC drive
• One piece expanding seal spacer stack assembly
• Linearly reciprocating piston operation

  SPECIFICATIONS

  GENERAL
  Inlet/Outlet Fitting Connections	1” – 1.25” NPT ¾” – 1.5” Sweat ¾” – 1.5” Solvent ¾” – 1” SharkBite® ¾” – 1” John Guest®
  Cycles	up to 6
  Valve Material	Fiber Reinforced Composite
  Regeneration	Downflow/Upflow
  Operating Pressures	20 – 125 psi
  Operating Temperatures	40° – 110° F
  Options	Backwash Filter, Bypass, Weather Cover

   

  FLOW RATES
  Service @15 psi drop includes meter and bypass	27 gpm
  Backwash @25 psi drop includes bypass	27 gpm
  Cv Service	7.0
  Cv Backwash	5.4

   

  TANK APPLICATIONS
  Water Softener	6” – 21” diameter
  Water Filter	6” – 21” diameter Filter tank size calculated @ 10 gpm of backwash per square foot of bed area

   

  METER
  Accuracy	± 5%
  Flow Rate Range	0.25 – 27 gpm
  Gallon Range	20 – 50,000 gallons
  Totalizer	1000 – 9,999,000 gallons

   

  DIMENSIONS & WEIGHT	1.050″ OD PIPE (¾” NPS)
  Drain Line	¾” or 1” NPT
  Brine Line	3/8” or ½” OD Poly Tube
  Mounting Base	2 1/2” – 8 NPSM
  Height From Top Of Tank	7 3/8”
  Weight	4.5 lbs.

Aldex C800 x 10 Chlorine Resistant / Extended Life Resin

Aldex-C-800×10-Water-Softening-Resin-Sodium-Form-US

Oxidants such as chlorine, chloramine, ozone, peroxide, etc. are the ultimate enemy of water softening resin.  Exposure of resin to greater than 1 part per million (PPM) of these oxidants WILL break the resin down over time, eventually causing a flow and pressure drop throughout the entire home or business, necessitating the replacement of the resin.

An “Aldex Rule of Thumb” is that every 1 PPM increase in oxidant levels above 1 PPM cuts an 8% crosslinked resin’s normal life expectancy (6-8 years) in half.

Higher crosslinked resins (10% in our case) are scientifically formulated to have greater resistance to oxidants, and will last longer in water with elevated oxidant levels (> 1 PPM).  A 10-year case study in a residential environment with an oxidant level of 5 PPM showed a significant cost savings due to a reduced frequency of required resin changeouts over the course of the study.

While higher crosslinked resins have a higher upfront cost, that cost is more than offset by the extended lifespan of the resin, and the
reduction in needed change outs.

USEFUL INFO:

Clack Unit Build Sheet

Clack Error Code Sheet-1